RSS

Ultra Tile Pvt. Ltd is India’s largest manufacturer of Designer Tiles with the annual production capacity of 30 million sq.ft

Designer Tiles with Test Values and Specifications

Being India's Largest Designer Tiles Manufacturer, Ultratile have done various tests and surpasses the standards specified in IS 1237, DIN No.51094, ASTM E303, ISO 10545, ASTM E1980, EN410 and IS 516 for heavy duty tiles.  Designer Tiles being tested assure you the quality of tiles  and ultratile have achieved good test results as per IS standards and specifications. Below are the test results of ultra tiles 

  • Skid Resistance, As per ASTM, E303 shall not be less then 25. Our test results achieved    always more then 45. 

  • As per DIN 51094 color change should not be there. No color change observed in our product.

  • All our Designer tiles have good impact resistance by/co-efficient of restitution.

  • As per IS Specification , the flatness of the tile have  not exceeded 1mm(IS 1237).

  • Abrasion/ Wear Resistance is much below the required rate of 3.5mm for non heavy duty and 2 mm for heavy duty flooring.

  • Water Absorption (%) is much below maximum of 10% allowed in IS 1237.

Ultra Designer Tiles have not yet finish their testing process and we are continuing the test process for each and every new type of designer tiles.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

How to Lay Tiles On Walls

Have you planned to design your house or business premises with wall tiles? If so, you have made a wise choice to decorative your house or business, but make yourself more wiser by knowing some of the laying instruction of tiles on walls so that you can judge whether tiles has been laid properly. Here are the instructions that you should know before laying tiles on walls.

Simbel Wall Tiles


  • First the surface to be tiled should be plaster with mortar, by mixing sand and  cement in the ratio 1:3).

  • Then, a cement mortar should be prepared by mixing cement sand and water and forming a thick paste. It shoudl be spreaded on the back side of the tile after wetting the tile with  sponge.

  • Backside of the tile should be made wet with water and remember that complete immersion of water is not required. 

  • Depending upon the shape of the tiles, the right angles for the area should be set and the first tile should be placed along the right angle lines and it should be placed on a base mortar. Then it should be tapped gently only with a rubber or wooden mallet to obtain perfect levels. 

  • The area on which the tiles are laid should not be used for atleast 24 hours. The joints should be filled with pointing material which is a mixture of white cement and desired color pigment. To get higher quality of finishes you can use a polymer based cementitous tilling joint filler like Roffe rainbow only if requried. 

  •  Remember that pointing material should not be applied all over the surface and allow pointing material to set for 15 minutes and then clean the surface of the tile with a clean wet sponge, removing the excess pigment on the tile surface.

  • To obtain a clean surface, just wash the surface in which the tiles were laid with soap water or with mild detergent and then wipe it. 

Hope, you got some tips on laying instruction for wall tiles. Make sure that the person who lay the tiles follow it and make your place attractive with excellent designer tiles quality. 

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Importance of Floor Tiles in Your Business Premises

Most of the business people give more importance to their company infrastructure. Do you know why? Infrastructure speaks about your quality and your way of business and if you want your business to be get spreaded, then you need to give more importance to your infrastructure. When  considering business infrastructure,  maintaining the floors are essential and your flooring should give a best look and it should be so attractive.


On that point of view, floor tiles play a vital role and there are varieties of designer tiles models are available such as Falcon, Grand Master, Chathura, Corwin, Nexus, Melvin and more. Each type looks so attractive and when laying these tiles on your floor, you need to approach the best tiles manufacturer who can afford you these tiles in a quality and most affordable way. Some of the manufacturers provide plenty of resources regarding the laying of tiles and other information on their website. Also, they have skilled man resources who can lay tiles so that you dont need to search for them.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

How to Lay Tiles on Floors

While buying tiles, we mostly depend upon the person who lay it and later if you find that it doesnt suits well to your floor or wall, we feel worried. Why should it happen? Instead of worrying later, let us know some of the basic instructions on how to lay floor tiles. Here it goes.

  • Prepare base mortar with cement and sand in the ratio 1:4.

  • Set the levels for floor (i.e. dead level or slope as specified by the Architect / Contractor).

  • Prepare cement slurry i.e. mixture of cement and water to form a thick paste and spread it on the leveled base mortar.

  • Wet the back side of the tile with water. Complete immersion of water is not required.

  • If tiles are square or rectangular in shape, set the right angles for the area and place the first tile along the right angle lines and place it on base mortar. Tap gently only with a rubber or wooden mallet to obtain perfect levels.

  • Clean the surface of the tile with clean water immediately after laying with wet sponge, Ensure the base mortar cement which squeezes through the joints does not settle on the tile. Also ensure that the water used is not hard to brackish.

  • Do not use the area laid for at least 24 hours.

  • Fill in the joints with pointing material which is a mixture of white cement and desired color pigment. For higher quality of finishes, You could use, if required, a polymer based cementitous tilling joint filler like Roffe rainbow. To get the desired color/shade, mix the same with water to form a smooth paste which should be applied to the joints, preferably with the use of rubber squeeze or rubber sheet. Do not apply the pointing material all over the surface.

  • Allow pointing material to set for 15 minutes and then clean the surface of the tile with a clean wet sponge, removing the excess pigment on the tile surface.

  • Wash the surface with soap water or mild detergent to obtain a clean surface and wipe it.


Ultra Designer Tiles India get the best out of your purchase with a team of experienced professionals.




  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

How to make your outdoor wall attractive?

House, a place where we share our joys and sorrows and ofcourse today it is one of our best resource too. Since we spent our life over there, we give utmost importance to it when renovating or building a new one. On inside part of your building, you would have many interior designs and ideas, but most of us fail to give a better look to outdoors. We know that first impression is the best impression and when any visitors visit your house, they should be amazed looking your outer part of the house. So just impress them on their first visit by decorating your outdoor with some great outdoor design ideas.

Hope, you would be thinking what would be the best decorative ideas. Whether can we paste any wall papers. Oh no, it would be so easily damaged on different weather conditions. Would painting some arts would be the best idea. May be, it would be best when it is of interior part, but doesnt suit outdoors. Then, what would be the permanent solution? It is better to have outside tiles or outdoor tiles which would be a permanent solution and also give a great look to your outdoor. Having outdoor tiles reduces your painting expense and also it would be your one time investment. So make your outdoor walls attractive with best designer tiles and live a joyful life in your dream house.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

About Ultra Tiles

Ultra Tile Pvt. Ltd is India’s largest manufacturer of Designer Tiles with the annual production capacity of 30 million sq.ft. Incorporated in the year 1993, Ultra Tile with its 15 manufacturing units at strategic locations in the states of Tamil Nadu, Kerala, Maharashtra, Noida, Andhra Pradesh, Karnataka and Rajasthan is able to meet the customer’s demands as per schedule with competitive price. Ultra Tile’s network of 600 dealers and Display Centers along with 34 branches covers all major towns and cities in India. Orientation Centers are located at 8 important locations in addition to the Ultra Galleries at the showrooms of reputed dealers and distributors outlets. These Orientation Centers provide various design options and display of the entire range of Ultra Designer Tiles and extend technical assistance with a team of experienced professionals.

Step Tiles India

Ultra Designer Tiles the most sought after tiles for elegance that enhances the aesthetic value of living quarters and commercial arcades.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS